Juniper Networks EX3200 Manuel d'utilisateur télécharger pdf (Page 144)

Figure 37: Attaching Rubber Feet to an EX3200 or EX4200 Switch Chassis

Related Topics ■ Connecting AC Power to an EX3200 or EX4200 Switch on page 146

■ Connecting DC Power to an EX3200 or EX4200 Switch on page 148

■ Connecting and Configuring an EX Series Switch (CLI Procedure) on page 161

■ Connecting and Configuring an EX Series Switch (J-Web Procedure) on page 163

■ Clearance Requirements for Airflow and Hardware Maintenance for EX3200 and

EX4200 Switches on page 91

Mounting an EX3200 or EX4200 Switch on Two Posts in a Rack or Cabinet

You can mount an EX3200 or EX4200 switch on two posts of a 19-in. rack or cabinet

by using the mounting brackets provided with the switch. (The remainder of this

topic uses “rack” to mean “rack or cabinet.”)

You can mount the switch on four posts of a four-post rack by using the mounting

brackets provided with the separately orderable four-post rack-mount kit. See

“Mounting an EX3200 or EX4200 Switch on Four Posts in a Rack or Cabinet” on

page 121.

NOTE: If you need to mount the switch in a recessed position on either a two-post

rack or a four-post rack, you can use the 2-in.-recess front brackets provided in the

separately orderable four-post rack-mount kit.

Before mounting an EX3200 or EX4200 switch on two posts in a rack:

■ Verify that the site meets the requirements described in “Site Preparation

Checklist for EX3200 and EX4200 Switches” on page 81.

■ Place the rack in its permanent location, allowing adequate clearance for airflow

and maintenance, and secure it to the building structure.

118 ■ Mounting an EX3200 or EX4200 Switch on Two Posts in a Rack or Cabinet

Complete Hardware Guide for EX3200 and EX4200 Ethernet Switches

1 2 ... 139 140 141 142 143 144 145 146 147 148 149 ... 283 284

Pas de commentaire

Juniper Networks EX3200 Manuel d'utilisateur Page 144