Juniper Networks EX3200 Manuel d'utilisateur télécharger pdf (Page 131)

Figure 35: EX4200 Switches Mounted on Adjacent Racks and Connected in a Ring

Topology Using Medium and Long Cables: Option 2

Related Topics ■ Understanding Virtual Chassis Hardware Configuration on an EX4200 Switch on

page 101

■ Understanding Virtual Chassis Components

■ Planning the Virtual Chassis on page 102

■ Virtual Chassis Ports Connector Pinout Information for EX4200 Switches on

page 74

■ Example: Configuring a Virtual Chassis Interconnected Across Multiple Wiring

Closets

Adding a New Switch to an Existing Virtual Chassis Configuration (CLI Procedure)

You can add one or more EX4200 switches to an existing Virtual Chassis configuration.

Up to ten EX4200 switches can be included within a Virtual Chassis configuration.

You can add the new switches to either type—nonprovisioned or preprovisioned—of

Virtual Chassis configuration. See Configuring a Virtual Chassis (CLI Procedure) for

descriptions of these types.

To add a switch to an existing Virtual Chassis configuration, use the procedure that

matches what you need to accomplish:

■ Adding a New Switch to an Existing Virtual Chassis Configuration Within the

Same Wiring Closet on page 105

■ Adding a New Switch from a Different Wiring Closet to an Existing Virtual Chassis

Configuration on page 106

■ Adding a New Switch to an Existing Preprovisioned Virtual Chassis Configuration

Using Autoprovisioning on page 108

Adding a New Switch to an Existing Virtual Chassis Configuration Within the Same Wiring

Closet

Before you begin, be sure you have:

■ Mounted the new switch in a rack.

■ Confirmed that the new switch is powered off.

■ If you are expanding a preprovisioned configuration, made a note of the serial

number (on the back of the switch). You will need to edit the Virtual Chassis

configuration to include the serial number of the new member switch.

■ If you are expanding a preprovisioned configuration, edited the existing Virtual

Chassis configuration to include the serial number of the new member switch.

Adding a New Switch to an Existing Virtual Chassis Configuration (CLI Procedure) ■ 105

Chapter 8: Planning the Virtual Chassis

1 2 ... 126 127 128 129 130 131 132 133 134 135 136 ... 283 284

Pas de commentaire

Juniper Networks EX3200 Manuel d'utilisateur Page 131