Juniper-networks SRX 210 Manuel d'utilisateur télécharger pdf (Page 86)

Grounding the SRX210 Services Gateway

To meet safety and electromagnetic interference (EMI) requirements and to ensure

proper operation, you must adequately ground the SRX210 Services Gateway before

connecting power.

Figure 23 on page 70 illustrates connecting a grounding cable to the services gateway.

Figure 23: Grounding the SRX210 Services Gateway

You ground the device by connecting a grounding cable to earth ground and then attaching

it to the chassis grounding points using one M3 screw.

Table 29 on page 70 lists the specifications of the grounding cable used with the device.

Table 29: Grounding Cable Specifications for the Services Gateway

SpecificationGrounding Requirement

14 AWG single-strand wire cableGrounding cable

Up to 4 AAmperage of grounding cable

Ring-type, vinyl-insulated TV14-6R lug or

equivalent

Grounding lug

CAUTION: Before device installation begins, a licensed electrician must

attach a cable lug to the grounding and power cables that you use. A cable

with an incorrectly attached lug can damage the device (for example, by

causing a short circuit).

SRX210 Services Gateway Hardware Guide

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 175 176

Pas de commentaire

Juniper-networks SRX 210 Manuel d'utilisateur Page 86